How to partition a USB drive or SD card in Windows

Partition a USB Flash Drive? This is interesting because mass memories currently allow us to store data permanently on a disk. That is, the data is not volatile. These include hard drives, SD cards and USB sticks. We are going to be interested in USB keys and SD cards.

Currently these devices are produced with cmuch higher storage capacity ranging from several GB to a few TB, and faced with these new capacities, it seems important to me to show how partition a USB drive or SD card this in order to make efficient management of disk space and our files on this medium.

In this article it will be about how to partition a USB key with the software ” BootIce Which you can download from this page.

See as well : The Basic Software You Need For Your Computer

After downloading the file, unzip it then double-click on the executable file and proceed as follows:

1. To partition a USB key: Start by Open BootIce

Partition a USB drive or SD card

2. Choosing the disk to partition

Choose your destination disk ” Destination disk »Then made the choice for me it is« RM1 »which will allow me to see my USB key with its capacity for my case (1.9 GB).

Partition a USB drive or SD card

Click on ” Parts Manage

Partition a USB drive or SD card

Then “Re-partitioning”

3. The choice of partition mode

Choose USB-HDD Mode (Multi Partition)

Partition a USB drive or SD card

4. Specify the sizes of the partition volumes

By default “BootIce” provides for 4 partitions of the same volume, that is to say it takes the total volume of your removable disk and divides it by 4 and it is up to you to complete the size of your partitions according to your needs. wants.

Partition a USB drive or SD card

As I only need two partitions I complete with 0s (2 and 3 for me) the partitions that I do not want to have, notice that you do not have the possibility to modify the size of the fourth partition.

Partition a USB drive or SD card

Complete the size of the partitions you want to have in MB, prefer NTFS or FAT32 file system. At home FAT16 is used because I have a low capacity USB stick. Note that you can also complete the name or label that your scores will display.

Leave the other actions by default (take MBR as the partition type) then click on ” OK

A message informing you that your device will be formatted and repartitioned:

Partition a USB drive or SD card

Click on ” OK To format and partition your drive.

5. Activate a partition

Make the partition you are going to use active by choosing it then clicking on ” Activate

Partition a USB drive or SD card

You will be offered the following confirmation message

Partition a USB drive or SD card

Note that in Windows operating systems only one partition will be visible. Although there will be several on the disc.

See as well : Download ISO To USB And Make Your USB Drive Bootable

6. Cancel the distribution to stay with one

To make your key or SD card as it was before the partition (that is to say a single partition), proceed in the same way up to step 3 then choose the “USB-HDD Mode (Single Partition). ) ”

Partition a USB drive or SD card

Validate with ok, knowing that you will be able to change the file system and the volume label.

Partition a USB drive or SD card

You can also test “Active partition Manager” which also allows you to do the same task.

7. Bonus

For partition a hard drive you can use the tool ” Computer management “To partition it, open” thefile explorer “, Right click on” This PC »Then select« To manage ” go to ” Storage ” then ” disk management

Partition a USB drive or SD card

Right click on the volume to be reduced, choose ” reduce volume And follow the steps, if you have a problem partitioning your hard drive leave a comment or for any other concerns.

Read also: How To Remove Syswin, The Virus That Turns Your Executables Into 0 Bytes

Leave a Comment