HowTech

How to Fix Error 0xc00000e9 Easily (6 Solutions)

Usually, the error 0xc00000e9 is due to hard drive or rather memory space. while you will meet her after theinstalling an update or an upgrade to a newer version of the operating system.

error 0xc00000e9
error 0xc00000e9

Causes of the Windows error code 0xc00000e9


Among the most common reasons for the 0xc00000e9 error is:

  • System files corrupt ;
  • There is no no contact between the hard drive and the motherboard;
  • Logout / Login incorrect removable storage device (USB stick, external hard drive);
  • Registry files damaged ;
  • Hard disk damaged or its controller;
  • There is a problem with the device you are installing Windows from (for example, a USB flash drive).
  • Errors in the downloaded Windows compilation (it is better to use the original Windows images);
  • Virus.

Method 1: Check the peripheral connections


  • Turn off your devices Windows 10 or Windows 8.1, 8.
  • Once the process stop done, check the ports Usb your device and disconnect all USB cables except the one from your keyboard and that of the mouse.
  • Start your device as usual.
  • Check and see if you still get error code 0xc00000e9.
  • If the error code no longer appears, you will need to plug in one device at a time following the same procedure. above.

disconnect peripherals
disconnect peripherals
  • If you notice that after plugging in the printer, for example, you get this error code, you will need to change the usb printer in this case and update printer driver. to support Windows 8 or Windows 10 operation
  • You can also try to update your drivers automatically to avoid permanent damage to your system
driver update
driver update

Method 2: Check your SATA cables


If this happens on a PC, some users have found that using an old SATA such as a cable SATA II with a port SATA III and the Hard disk sometimes can’t provide a data transfer rate sufficient. In this situation, the operating system is not able to communicate with the hard drive, resulting in this error.

  • Turn off your PC.
  • Open your case and locate the hard drive and the port SATA to which it is connected.
  • Replace your cable by a new one, if you have one SATA II cable, see if you can borrow a SATA III from a friend, just to see if it works.
  • If it works, you know you just need a SATA cable newer version, which should be fairly inexpensive.
SATA cable
SATA cable

See as well: [5 Solutions] Repair Error 0x800705b4 (Win Update & Defender)


Method 3: Set your hard drive as the first boot device


Configure your hard drive to be the primary device for boot into BIOS / UEFI can also sometimes solve the problem.

  • Enter your BIOS. To do this, press a button predefined by the manufacturer while the function is running. POST screen (power-on self-test). This button can be ESC, F2, F12, Backspace etc. and you will find there on the screen POST before Windows starts. Quickly press this key to access the utility BIOS / UEFI.
  • Inside, look for boot options. Otherwise all BIOS / UEFI utilities have navigation instructions at the bottom or right of the screen – use them to navigate to the menu.
  • In the boot options, take a look at the priority of start-up. You need to make sure that the first boot device is your Hard disk. Follow the navigation instructions to reach and put the Hard disk at the top of the boot device list.
  • Exit and save your changes and restart your device. This should fix your problem.
hard drive at Bios boot
hard drive at Bios boot


Method 4: Check for hard drive issues


If your hard drive has a few errors where he has sectors defective, the 0xc00000e9 will appear on Windows 10/8/7. It is strongly recommended that you test the drive for detect any error.

Step 1. Turn on your PC, insert it Windows installation DVD, and then restart your computer.
2nd step. Select the language and region, then click Repair your computer.
Step 3. On the Windows 10 installation media (or Windows 8.1, Windows 8), select ” Repair »Then on« Command prompt“. In Windows 7 installation media, in the ” System recovery options », Select the option and click on; ” Command prompt“.
Step 4. In the command prompt, type ” chkdsk / f / r«, Then press« Entrance“.
Step 5. Press on Y on your keyboard.

chkdsk / f / r
chkdsk / f / r

Method 5. Check system files


In window d‘command prompt that you open in the last method, you can also enter ” sfc / scannow / offbootdir = d: / offwindir = d: windows To check the integrity of Windows system files.

sfc scannow offbootdir
sfc scannow offbootdir

See also: Fix Windows Update Error 80070103 (4 Solutions)


Method 6. Repair / Rebuild Windows BCD Files


In some cases, repairing the startup configuration (BCD) helps you. To do this, you need to run the commands in the window d‘command prompt and restart the computer:
bootrec.exe / fixmbr
bootrec / fixboot
bootrec / scanos
bootrec / rebuildbcdd

bootrec
bootrec

Method 7: Change BIOS settings


Another method to correcterror 0xc00000e9 is to boot the computer through the hard drive, here are the steps follow me:

  • Turn off your computer.
  • Start– by pressing the button to start up.
  • Press the appropriate button to access the BIOS settings. The button varies depending on the brand of computer you own. It is best to consult your user manual, but in general it can be F12, F2, ESC, or the Delete key.
  • Once you are in theBIOS setup utility, go to Boot options. change the hard drive as the primary boot device. Use the arrow key to move it to the top of the list.
  • Save the changes you made and restart your computer. This should fix the problem.

[wpdreams_ajaxsearchlite]

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker